国外木材工业企业的热能源自给技术

本文介绍了国外木材加工企业实现热能源自给的高效，节能除尘－供热系统。     

耕整机齿轮热处理工艺研究

齿轮是耕整机的关键零件,通过对齿轮工况及耕整机工作时的受载分析,制定出齿轮机械加工工艺路线,并确定其热处理工艺参数。按该热处理工艺制造的齿轮,表层金相组织为回火马氏体和均匀分布的细粒状炭化物,心部为低碳马氏体及少量的铁素体,齿部硬度为HRC56-62,能满足设计要求。     

Effects of yard weaning and training on the behavioural adaptation of cattle to a feedlot

Two experiments were conducted to determine the effect of weaning in small yards, with or without a feed bunk training procedure, on the subsequent behaviour and performance of Bos taurus steers in a feedlot. A reduction in the incidence of bovine respiratory disease (BRD) was the primary objective. In each experiment, about 200 male beef calves (Angus × Hereford and Hereford) were separated from their mothers at 7–9 months of age and allocated to one of three matched weaning treatment groups. The treatments were (1) yard weaning with hay or silage, (2) yard weaning with hay or silage plus a novel handling procedure to train the animals to be able to find a grain ration in a trough, and (3) paddock weaning without supplement or handling according to common industry practice in southeastern Australia. Paddock weaning is the practice of abrupt separation of cows and calves followed by return to separate pasture paddocks, whereas yard weaning involves abrupt separation but the calves remain in the yards for several days. Experimental vaccines against the major BRD pathogens were given to half of each group 1–2 months prior to entry into a commercial feedlot. The yard weaned and yard trained cattle had a significantly greater weight gain in the first month and over the 90-day feeding period than the paddock weaned control groups. There was no difference between the groups in pre-feedlot weight gain. The yard trained groups showed greater feeding activity during the first few days in the feedlot, but were not significantly different in weight gain from yard weaned. The vaccination treatment also significantly improved the weight gain in the first month and over 80 days. The combination of yard weaning and vaccination produced the highest weight gains overall. There was consistently less morbidity in the yard weaned groups compared to paddock weaned controls. The morbidity in yard trained groups was intermediate between these two. Weaning in small yards and the appropriate use of effective BRD vaccines 1–2 months before feedlot entry are recommended for B. taurus feeder steers in southeastern Australia to minimise sickness and improve productivity in the feedlot. Associated benefits are reduced risks of antibiotic residues and of animal welfare problems.     

热应激对鸡新城疫疫苗免疫效果的影响

本试验利用伊莎蛋雏鸡，分别接种新城疫油乳剂灭活苗和Ｎ－７９弱毒苗，油乳剂灭活苗免疫的各试验组抗体滴度稍有下降，与对照组间无明显的差异；Ｎ－７９弱毒苗免疫的各试验组，高温处理２４小时的雏鸡，抗体滴度稍低于对照组，但无明显差异；而高温处理４８小时的各组，抗体滴度均显著低于对照组（ｐ＜０．０５）。     

奶牛抗热应激中草药添加剂对小鼠热耐力的影响

试验研究奶牛抗热应激中草药添加剂对热应激小鼠机体耐力的影响。试验分A、B、C、D4个处理,每个处理20只小鼠,分别喂以不同添加剂浓度的饲料21d[A组:0.5g/(10g体重)、B组:0.25g/(10g体重)、C组:0.13g/(10g体重)、D组0g/(10g体重)],每日光暗节律各12h,自由摄食与饮水。试验结果表明,A、B组体重增加显著高于C、D组(P<0.01),A、B、C组小鼠死亡数显著少于D组(P<0.05),受热90min后,A、B、C组小鼠肛温比D组分别低0.3℃、0.3℃、0.5℃(P<0.05),说明该添加剂具有一定的提高小鼠热耐力作用。     

利用形状因子法计算木材干燥窑壳体的散热损失

指出了木材干燥窑壳体传热量的传统计算方法中的不足,并利用形状因子法来分析计算木材干燥窑壳体的传热量.对比2种计算方法所得的结果表明,传统的干燥窑壳体计算方法较为保守,而根据形状因子法计算结果来配置干燥窑的加热器面积则不会造成干燥窑中散热设备投资的浪费,同时也可以节省干燥窑墙体设计用材的量.     

Einfluss selektiver mechanischer Fruchtbehangsregulierung auf Ethylensynthese als Stressindikator sowie Ertrag und Fruchtqualität bei Kernobst

The overall objective of this work was to improve fruit quality, break alternate bearing and reduce hand thinning using fewer chemicals in fruit crops. A device was constructed for mechanical thinning, which consisted of three independent horizontal rotors with ropes and freely adjustable angles on a frame, mounted on a front three point hitch and powered by the tractor hydraulics. This can be adapted to any fruit tree trained as spindle, Solaxe, (tall) vertical axis or fruit wall (le mur fruitier) irrespective of rootstock employed. Rotor speed varied from 300 to 460?rpm at either 5 or 7.5?km/h tractor speed. Eight-year-old or twelve-old apple trees cvs. ‘Gala’ and ‘Golden Delicious’ were mechanically thinned in 2007 between pink bud and full bloom (flower bud stages 6–8 or F1–F2) near Bonn, Germany; non-thinned and hand-thinned apple trees of the same block and variety served as control. Mechanically thinned flowering branches showed a similar amount of ethylene efflux (0.4–0.6?ppm C₂H₄/branch) as non-thinned flower branches, preventing potentially unexpected subsequent fruit drop, except for those removed by the rotors. The impact of the horizontal rotors on the branches was from the upper side and removed excessive flowers right to the tree trunk viz. the centre of the tree canopy, where fruits of lesser quality are expected leaving 2–3 flowers per cluster. Leaf damage was less than??10%, even at the fast rotor speed of 420?rpm, which was associated with negligible wood injury. Mechanical thinning induced firmer and sweeter fruit, i.e. tastier apples with longer shelf life, relative to control fruit from non-thinned apple trees. The greatest efficacy in terms of final fruit quality in the grading/sorting was achieved by a rotor speed of 360?rpm at a tractor speed of 5?km/h: Fruit mass increased by up to 20?g and the proportion of fruit larger than 70–75?mm by 10–30% compared with the fruit from non-thinned trees. Mechanical thinning with this newly constructed device led to a 10–20% reduction in yield, but increased returns due to better fruit size and colouration in apple with the potential to overcome alternate bearing.     

Initiation and development of microspore embryogenesis in recalcitrant purple flowering stalk (Brassica campestris ssp. chinensis var. purpurea Hort.) genotypes

Purple flowering stalk (Brassica campestris ssp. chinensis var.purpurea Hort.) was generally regarded as a recalcitrant species for microspore culture in Brassica crops. Conditions for reliable induction of microspore embryogenesis were studied in 12 genotypes of purple flowering stalk. A treatment of short heat shock to microspore by incubating at 32 °C for 18 h was suitable for the survival of microspores, sustained cell divisions, and further induced embryogenesis. Subsequently, the reduced concentration of macro salts (1/2 NLN) provided an optimal condition for the development of embryoids. Under the optimized conditions for microspore embryoid development, 10 genotypes responded to microspore culture with the frequencies ranging from 2.7 to 70.5 embryoids per dish. However, regenerated plants were obtained from 9 genotypes, and more than 75% these regenerated plants were double haploid. This report establishes an efficient protocol for microspore culture and offers great potential for DH breeding in purple flowering stalk.     

不同贮前热处理对青种枇杷果实贮藏效应的研究

通过采用不同的贮前热处理温度和时间组合,研究白沙枇杷青种在低温条件下的贮藏的内外品质的变化.结果表明:3种贮前热处理中,B处理(45℃热水处理10 min+低温(6±1℃))的效果最好,不仅青种枇杷果实的失重率和腐烂率低;而且贮藏到30 d时,枇杷果实的固酸比最高,较好保持了果实的风味.